Reducing Video Noise; Setting Child Lock; Item - Pioneer PDP-4270XA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 223
08
Setting up
11 Select "Colour System" (/).
12 Select a colour system (/).
You can select from among "Auto", "PAL", "SECAM", and "4.43NTSC".
Search
System
Colour System
Store
13 Select "Store" (/).
14 Select "Yes", "Yes (Listed)", or "No" (/).
System
Colour System
Store
Tuner NR
Child Lock

Item

Description
Yes
You can select the channel using P+ / P–.
Yes (Listed)
Select this option to register the channel as your favourite
channel.
You can select the channel using the Favourite Channel list
and P+ / P–.
No
You cannot select the channel using P+ / P–.
15 Press HOME MENU to exit the menu.
• Alternatively, to set up for another channel, repeat steps 6 to 14.
Note
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as a VCR
or DVD/HDD recorder (DVR).
• Manual Adjust also allows you to make selections for Tuner NR,
Child Lock, and Decoder. See Reducing video noise, Setting Child
Lock, and Selecting a decoder input terminal.
26
En
42.75MHz
B/G
Auto
No
B/G
Auto
Yes
On
View

Reducing video noise

For the individual channels, you can specify whether the plasma
television should reduce video noise depending on the levels of
broadcasting signals.
1
Repeat steps 1 to 6 provided for "Setting up analogue TV
channels manually".
After selecting a channel (using Programme Entry), perform the
following steps:
2
Select "Tuner NR" (/).
3
Select "On" or "Off" (/).
Colour System
Store
Tuner NR
Child Lock
Decoder
4
Press HOME MENU to exit the menu.
Note
• This function may not achieve a satisfactory result, depending on
the conditions of broadcasting signals.
• When using a decoder with a decoder terminal selected, this
function may fail to achieve a good result.

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned and
watched.
1
Repeat steps 1 to 6 provided for "Setting up analogue TV
channels manually".
After selecting a channel (using Programme Entry), perform the
following steps:
2
Select "Child Lock" (/).
3
Select "Block" (/).
Tuner NR
Child Lock
Decoder
• The selection is switched between "View" and "Block".
4
Press HOME MENU to exit the menu.
Auto
Yes
On
View
Off
On
Block
Off

Publicidad

Tabla de contenido
loading

Tabla de contenido