Using P+ / P- On The Remote Control Unit; Using 0 To 9 On The Remote Control Unit; Tuning To Your Favourite Channels; Changing The Volume And Sound - Pioneer PDP-4270XA Manual De Instrucciones

06 Watching TV
Using P+ / P– on the remote control unit
• Press P+ to increase the channel number.
• Press P– to decrease the channel number.
When viewing Teletext information:
• Press P+ to increase the page number.
• Press P– to decrease the page number.
See also Using the Teletext Functions on page 42.
Note
• The CHANNEL +/– buttons on the plasma television work in the
same way as P+ / P–.
• P+ / P– cannot pick up channels that are set to skip. For Channel
Skip, see steps 13 and 14 under Setting up analogue TV channels
manually on page 25.
• P+ / P– cannot pick up channels that are not registered as
favourites. For favourite channel registration, see steps 13 and 14
under Setting up analogue TV channels manually on page 25.

Using 0 to 9 on the remote control unit

• Select channels directly by pressing buttons 0 to 9.
For example:
To select channel 2 (1-digit channel), press 2.
To select channel 12 (2-digit channel), press 1 then 2.
When viewing Teletext information:
• View a page directly which is 3-digit page number from 100 to 899
by pressing buttons 0 to 9. See also Operating the Teletext basics
on page 42.
Note
• In standby, when you press 0, the power turns on and images
come from the INPUT 1 source. Or, when you press any button
from 1 to 9, TV images display.
22
En

Tuning to your favourite channels

If you have registered your favourite channels, selecting from the
registered list may be the easiest way to tune to those channels.
Note
• You can register up to 16 channels as your favourite channels. For
the registration, see steps 13 and 14 under Setting up analogue TV
channels manually on page 25.
1 While watching broadcasts, press ENTER to call up the
Favourite Channel List.
Favourites
01
**********
02
****
03
****
04
****
05
****
06
****
07
****
08
****
Select a favourite channel to tune in (/, / then
2
ENTER).
• Press RETURN to exit the Favourite Channel List.

Changing the volume and sound

Use the remote control or the control panel on the right-hand side of
the plasma television to adjust the volume.
Using i + / i – on the remote control unit
• To increase the volume, press i +.
• To decrease the volume, press i –.
Volume adjustment
• VOLUME +/– on the plasma television operates the same as
i + / i –.
09
**********
10
****
11
****
12
****
13
****
14
****
15
****
16
****