Advanced Picture Adjustments; Using Purecinema; Using Color Temp - Pioneer PDP-507XG Manual De Instrucciones

Setting up
For a PC source, the following screen appears:
Picture
AV Selection
Contrast
Brightness
Red
Green
Blue
Reset
4 Select the desired level (
Contrast
When an adjustment screen is in display, you can also change the
item to be adjusted, by pressing
5 Press HOME MENU to exit the menu.
For AV source
Item button
Contrast For less contrast
Brightness For less brightness
Color For less color intensity
Tint Skin tones become purplish Skin tones become
Sharpness
For less sharpness
For PC source
Item button
Contrast
For less contrast
Brightness
For less brightness
Red
For weaker red
Green For weaker green
Blue For weaker blue
Note
• To perform advanced picture adjustments, select "Pro Adjust"
in step 3 and then press ENTER. For the subsequent
procedures see Advanced picture adjustments below.
• To restore the factory defaults for all items, press
"Reset" in step 3, and then press ENTER. A confirmation screen
appears. Press to select "Yes", and then press ENTER.
STANDARD
40
0
0
0
0
).
40
.
button
For more contrast
For more brightness
For more color intensity
greenish
For more sharpness
button
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
to select

Advanced picture adjustments

The plasma display provides various advanced functions for
optimizing the picture quality. For details on these functions, see
the tables.

Using PureCinema

1 Press HOME MENU.
2 Select "Picture" ( then ENTER).
3 Select "Pro Adjust" (
4 Select "PureCinema" (
5 Select the desired parameter (
For the selectable parameters, see the table.
PureCinema
Automatically detects a film-based source (originally encoded at 24 frames/
second), analyses it, then recreates each still film frame for high-definition
picture quality.
Selections Off Deactivates the PureCinema.
Standard Produces smooth and vivid moving images
(film specific) by automatically detecting
recorded image information when
displaying DVD or high-definition images
(e.g., movies) having 24 frames per second.
ADV Produces smooth and quality moving
images (as shown on theatre screens) by
converting to 72 Hz when displaying DVD
images (e.g., movies) having 24 frames per
second.
Note
• "Standard" is not selectable when 480p or 720p@60 Hz signals
are input.
• "ADV" is not selectable when PAL, SECAM, 576i, or 1080i@50 Hz
signals are input.
• Neither "Standard" nor "ADV" is selectable when 576p,
720p@50 Hz, or 1080p@24 Hz signals are input.

Using Color Temp

1 Press HOME MENU.
2 Select "Picture" ( then ENTER).
3 Select "Pro Adjust" (
4 Select "Color Detail" (
5 Select "Color Temp" (
6 Select the desired parameter (
• If you have selected a desired parameter in this step, skip steps
7 and 8.
• You may rather want to perform fine adjustment. To do this,
select "Manual" first and then press and hold ENTER for more
than three seconds. The manual adjustment screen appears.
Then go to step 7.
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
08
29
En