Color System Setting; Selecting A Screen Size Manually - Pioneer PDP-507XG Manual De Instrucciones

09 Useful adjustment settings
6 Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A confirmation
screen appears. Press
ENTER.

Color system setting

If an image does not appear clearly, select another color system
(e.g., PAL, NTSC).
1 Press HOME MENU.
2 Select "Option" (
3 Select "Color System" (
4 Select a video signal system (
Color System
Auto
PAL
SECAM
NTSC
4.43NTSC
PAL-M
PAL-N
• You can select "Auto", "PAL", "SECAM", "NTSC", "4.43NTSC",
"PAL-M" or "PAL-N".
• With "Auto" selected, input signals are automatically identified.
5 Press HOME MENU to exit the menu.
Note
• The factory default is "Auto".
• You need to perform color system setting for each of INPUT 1,
2, 3 and 5.
• For the color system setting, see steps 11 and 12 under Setting
up TV channels manually on page 25.

Selecting a screen size manually

Press f f to switch among the screen size options selectable for f f
the type of video signals currently received.
f , the selection is switched. f
Each time you press f f
The selectable screen sizes differ depending on the types of input
signals.
Important
• If images with black bands on both sides or top and bottom of
the screen – when using the "4:3", "FULL 14:9", "Dot by Dot" or
"CINEMA 14:9" modes, for example – are displayed
continuously for long periods or for shorter periods of time over
several days, image retention may result. It is recommended
that you enjoy watching images displayed in full screen, except
when doing so may result in copyright infringement.
36
En
to select "Yes", and then press
then ENTER).
then ENTER).
then ENTER).
AV mode
Item Description
4:3 For 4:3 "standard" pictures. A side mask appears on each
to
side.
FULL 14:9
For 14:9 squeeze pictures. A thin side mask appears on each
side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask appears on
each side, and you may also see bars on the top and bottom
with some programs.
WIDE In this mode the picture is progressively stretched toward
each side of the screen.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on the top and
bottom with some programs.
CINEMA
For 14:9 letterbox pictures. Bars may appear on the top and
bottom on some programs.
PC mode (for non-XGA signals)
Item Description
4:3 Fills the screen without altering the input signal aspect
ratio.
FULL Full 16:9 screen display.
Dot by Dot Matches input signal with same number of screen pixels.
PC mode (for XGA signals)
Item Description
4:3 Matches input signal with the same number of screen
pixels.
Optimized for 1024 x 768 display.
FULL 1 Full 16:9 screen display
Optimized for 1024 x 768 display
FULL 2 For wide signal display
Use when displaying 1360 x 768 signal resolution.
AV mode
4:3
CINEMA FULL 14:9
ZOOM CINEMA 14:9
FULL WIDE