Footrest Supports - Invacare Action1 NG Manual Del Usuario

2.1.4 Footrest supports

- Standard footrest supports (photo 7) swing away during
transfers and can be removed during transport. Operate
lever (A) by pushing sideways and swivelling towards outside
or inside in case there is not enough space. To return to the
initial position, align the footrest support it locks automatically.
To remove the footrest support, simply pull up after
unlocking the assembly. Reverse the procedure to reassemble,
while still in the unlocked position.
- Legrest (photos 8 & 9) performs the same operation as for
the footrest support to swing away or remove the legrest, by
operating lever (A) which unlocks the locking system.
EN20
Standard (photo 8)
Angle Adjustment
After loosening the screw (B) with one hands while suppor-
ting the legrest with your other hand, adjust into one of nine
preset positions and firmly tighten the screw (B).
The calfpad swings away during transfers and have 3 depth
adjustment options.After loosening the screw (C), bring to
new position and firmly tighten the screw (C).
A
7
Comfort (9)
Angle adjustment
Pull the lever (B) with one hand while supporting the legrest
with your other hand.
When a suitable angle is obtained, let go of the lever and the
legrest will lock into one of seven preset
positions (schema 10).
The calfpad swings away during transfers and have 3 height
adjustment options. After loosening the screw (C), adjust to
the desired height and firmly tighten the screw (C).
In addition, it is depth adjustable loosen the screw (D), bring
to new position and firmly tighten the screw (D).
Do not place anything heavy, or let children sit on the
legrest. It may cause damage to the mechanism.
The distance between the lowest part of the footrest and the
ground must be at least 40 mm.
B
C
A
D
8
B
C
9
10