Device Signals And Voice Output; Identification On The Device Id Label - Seca 287 Manual Del Usuario

3.5 Device signals and voice output

3.6 Identification on the device ID label

Text/symbol
Mod
Approval Type
S/N
ProdID
e
d
x
The automatic weight and height detection of the device allows the patient to
perform a measurement independently.
During the measuring operation, the device supports measurement by means
of acoustic and visual signals, as well as voice output.
The table below is a summary of the signals and voice output of the device in
the sequence of the measuring operation:
Status LED on ultrasound head continuously
on
"Please stand upright and look straight."
Status LED on ultrasound head goes off
"Do not move. The measurement starts
now."
Short beeps
Long beep
"Your weight is (...) kilograms. Your height is
(...) centimeters. Your Body Mass Index is
(...)."
"The measurement is completed. Please
step off the platform."
"Take your printed ticket."
Model number
Type designation of design approval
Serial number, consecutive
Product identification number, consecutive
Follow instructions for use
Electrical medical device, type B
Insulated device, protection class II
Value in mass units (verified models)
• States the difference between two consecutive display values
• Used to classify and verify a scale
Value in mass units (non-verified models)
States the difference between two consecutive display values
Weighing range (verified models)
NOTE
The acoustic signals and voice output of the device can be configu-
red. Details can be found in the section entitled "Configuring voice
output (menu)" on page 82.
Signal/voice output
Meaning
English
Meaning
The device is ready for
measurement
Instruction to the patient
The measuring operation
is in progress
Instruction to the patient
The measuring operation
is in progress
The measuring operation
is complete
Announcement of the
measured results
Instruction to the patient
Instruction to the
patient/to staff
Overview • 63