Work Area; Electrical Safety; Personal Safety - WAGNER HT4500 Manual De Instrucciones

4.1 WORK AREA

 Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
 DO NOT operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
 Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.

4.2 ELECTRICAL SAFETY

 Power tool plugs must match the socket-outlet. Never modify the plug in
any way.
 Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
 DO NOT use on materials of or containing asbestos.
 DO NOT expose power tools to rain or wet conditions.
 DO NOT abuse the power cord. Never use the power cord for carrying,
pulling or unplugging the power tool. Keep power cord away from heat,
oil, sharp edges or moving parts.
 When operating a power tool outdoors, use an extension cord suitable
for outdoor use.
 It is recommended a RCD (Residual Current Device) rated at 30mA trip
current is fitted into the mains socket-outlet first for added protection
against electric shock.

4.3 PERSONAL SAFETY

 Stay alert, follow directions stated in the instruction manual and use
common sense when operating a power tool.
 DO NOT use a power tool while you are tired or under the influence of
drugs, alcohol or medication.
 Use safety equipment. It is recommended to wear eye protection.
Danger of burns - we recommend wearing a pair of heavy grade non-
pvc type work gloves.
 Avoid accidental starting by ensuring the switch is in the off "0" position
before plugging in.
 DO NOT overreach. Keep proper footing and balance at all times.
 DO NOT wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts.
5
EN