Dimensions And Weights; Technical Specifications; Table Of Technical Specifi Cations For Humidisk 10; Table Of Technical Specifi Cations For Humidisk 65 - Carel huniDisk Serie Manual Del Usuario

10. DIMENSIONS AND WEIGHTS

10.1 humiDisk
10
A
B
10.2 humiDisk
65
A
B

11.TECHNICAL SPECIFICATIONS

11.1 Table of technical specifi cations for humiDisk
Humidifi cation capacity
Power supply
Rated power
Air fl ow-rate
Water supply pressure
Water content in supply tank
Index of protection
Operating temperature
Operating humidity
Supply water
11.2 Table of technical specifi cations for humiDisk
Humidifi cation capacity
Power supply
Rated power
Air fl ow-rate
Water supply pressure
Water content in supply tank
Index of protection
Operating temperature
Operating humidity
Supply water
Note for humiDisk
10
affect the frequency of the routine maintenance operations and the amount of dust generated. For best
operation, use demineralised water (not softened, as this does not reduce the content of minerals dissolved
in the water).
At any rate, it is suggested to follow the specifi cations of the UNI 8884 standard, "Characteristics and
treatment of the water in cooling and humidifi cation circuits", conductivity <100 µS/cm; total hardness
<5 °fH (50 ppm CaCO
26
C
Fig. 10.a
C
Fig. 10.b
temperature
hardness
conductivity
temperature
hardness
conductivity
and humiDisk : The quantity and quality of the minerals dissolved in the water
65
)".
3
humiDisk - +030222022 - rel. 2.1 - 01.03.2012
A 312 mm
B 302 mm
C 390 mm
Weight 4.3 Kg
A 565 mm
B 505 mm
C 610 mm
Weight 17.6 Kg
10
1 kg/h (2.2 lb/h) at 230 V 50 Hz,
1.2 kg/h (2.6 lb/h) at 110 V 60 Hz
230 V, 50 Hz / 110 V, 60 Hz
31 W
80 m³/hour (47 cfm)
100 kPa to 1000 kPa
0.055 l (0.12 lb)
IPX4
+1 °C (+33.8 °F) to +35 °C (+95 °F)
0 to 100% RH
+1 °C (+33.8 °F) to +50 °C (+122 °F)
Max 30 °FH (max 300 ppm CaCO
)
3
conductivity
Tab. 11.a
65
1.1 to 6.5 kg/h (2.4 to 14.3 lb/h)
230 V, 50 Hz / 110 V, 60 Hz
0.23 kW (0.3 kW with heater)
280 m³/hour (165 cfm)
100 kPa to 1000 kPa
0.055 l (0.12 lb)
IPX4
+1 °C (+33.8 °F) to 35 °C (+95 °F)
0 to 100% RH
+1 °C (+33.8 °F) to +50 °C (+122 °F)
Max 30 °FH (max 300 ppm CaCO
)
3
100 to 1200 µS/cm
Tab. 11.b