Observe The Following For The Rmc-Zylinder - Aventics RMC Serie Instrucciones De Servicio

Table 2: Hazard classes according to ANSI Z535.6-2006
Safety sign, signal word
WARNING
CAUTION
NOTICE
General information
On installation
On commissioning
AVENTICS | RCM | R402002349-BDL-001-AC
The signal words have the following meaning:
Meaning
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could
result in minor or moderate injury or damage to equipment.
If this information is disregarded, the operating procedure may be
impaired
2.5

Observe the following for the RMC-Zylinder

Observe the local regulations to protect the environment in the
country of use and to avoid workplace accidents.
The RMC-Zylinder must never be altered or modified from its
original configuration.
The RMC-Zylinder may only be used within the power ranges
stated in the technical description. See the product catalogue.
Never use the RMC-Zylinder as a handle or to stand on.
Do not place loose objects on it.
Always depressurise the relevant part of the system before
installing or removing the RMC-Zylinder.
When lifting the device, take steps to avoid damaging it. Heavy
items must be carried by two people or by one person with
lifting aids.
Make sure that installation of the RMC-Zylinder is complete
before connecting compressed air.
Secure the system against reconnection if installation is not
complete and you need to leave the installation unattended.
Position cables where people cannot trip over them.
Check that all pneumatic connection ports are connected or
plugged.
When starting, increase the pressure slowly and use speed
control.
41
For your safety