Replacement; Replacing A Bus Coupler - Aventics DDL Serie, CL03 Serie Instrucciones De Servicio

82 AVENTICS | DDL, CL03/CL03-XL | R402003658–BDL–001–AE

Replacement

8 Replacement
A faulty bus coupler may have to be replaced with a new one.
You may also replace a multipole connector or another fieldbus
module of a CL03/CL03-XL VS with a bus coupler.
The AVENTICS warranty only applies to the delivered
configuration and extensions taken into account in the
configuration. The warranty no longer applies after a
conversion that exceeds these extensions.
Risk of damage to the manifold
The bus coupler may be damaged if the cover is exposed to
mechanical force, such as a hard blow.
O
Make sure that the device is protected from blows.
O
Make sure that the device is well packaged during
transportation.
8.1

Replacing a bus coupler

Applied voltage and high pressure!
Danger of injury from electric shocks and sudden pressure
drops.
O
Make sure the system is not under pressure or
connected to power when you exchange a module.
NOTICE
CAUTION