Care And Maintenance; Cleaning And Care - Aventics DDL Serie, CL03 Serie Instrucciones De Servicio

AVENTICS | DDL, CL03/CL03-XL | R402003658–BDL–001–AE
6. Connect the electrical connections to the bus coupler
(see "Connecting the bus coupler electrically" on page 63).
7. Check the configuration and adjust if necessary.
9

Care and Maintenance

Applied voltage and high pressure!
Danger of injury from electric shocks and sudden pressure
drops.
O
Make sure the system is not under pressure or voltage
before carrying out any service or maintenance work.
9.1

Cleaning and care

The unit could be damaged by solvents and aggressive
cleaning agents.
The surface and seals may be damaged if aggressive
chemicals are used.
O
Only use solvents or detergents under short term
conditions.
O
Do not exceed the conditions of the IP69K protection class.
The CL03/CL03-XL valve system and the bus coupler is
designed for wash-down areas, which means it can be cleaned
with high pressure and high temperature (IP69K conditions). It
is resistant against most common cleaning detergents in low
concentrations for short term exposure.
For detailed information, contact the supplier of the solvents or
cleaning detergents, or contact AVENTICS.
Care and Maintenance
CAUTION
NOTICE
85