Safety Instructions - Hilti PP 10 Manual De Instrucciones

Ocultar thumbs Ver también para PP 10:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
Battery life (PP10)
Battery life (PP 25)
Operating temperature range
Storage temperature range
Water and dust resistant
Weight (including 4 batteries)
Dimensions ( )
Range (automatic target plate detection)
PPA 20 remote control unit
Remote control operating range
Dimensions (L x W x H)
Weight (including batteries)
Power supply
Battery life (alkaline batteries)
Operating temperature range
Storage temperature range
Protection class
PPA 89 AC adapter
Mains supply
Mains frequency
Rated power
Rated voltage (DC voltage)
Operating temperature range
Storage temperature range
Weight
Dimensions (L x W x H)

5. Safety instructions

5.1 Basic information concerning safety
The tool is designed to be used for determining,
transferring or checking alignment in the horizontal
and inclined planes.
In addition to the information relevant to safety given
in each of the sections of these operating instructions,
the following points must be strictly observed at all
times.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070160 / 000 / 00
Temperature +20°C (+68°F), Alkaline manganese:
70 h
Temperature +20°C (+68°F), NiMH: Min. 48 h
Temperature +20°C (+68°F), Alkaline manganese:
45 h
Temperature +20°C (+68°F), NiMH: Min. 32 h
-20...+50°C (-4 to 122°F)
-30...+60°C (-22 to 140°F)
Depth of submersion 5 m (15 ft), Duration of sub-
mersion 24 h: Yes
3.8 kg (8 lbs 6 oz)
Without grip: 122 mm (4
5...150 m (15 to 500 ft)
In the pipe, from the front: 200 m (650 ft)
155 mm X 68 mm X 20 mm (6.1" x 2.7" x 0.8")
0.2 kg (7 oz)
4 size AAA cells
Temperature +20°C (68°F): approx. 8 months
-20...+50°C (-4 to 122°F)
-30...+60°C (-22 to 140°F)
As perIP 56 (in accordance withIEC 529)
100...240 V
50...60 Hz
15 W
12 V
+10...+40°C (+50 °F to +104 °F)
-10...+60°C (+14 to 104°F)
0.23 kg (0.51 lbs)
110 mm X 50 mm X 32 mm (4.3" x 2" x 1.3")
5.2 Misuse
a) The tool and its ancillary equipment may
present hazards when used incorrectly by
untrained personnel or when used not as
directed.
b) To avoid the risk of injury, use only genuine
Hilti accessories and additional equipment.
") X 330 mm (13")
21
en

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pp 25

Tabla de contenido