Daily Operations; Front Panel - JVC DT-V21G11 Manual De Instrucciones

Daily Operations

Front panel

• "NO EFFECT" is displayed when you press a button which is not available for the current input or signal format (the lamp lights even
when the function does not actually work).
• You cannot use the buttons for the items controlled by the MAKE system ("REMOTE ON" appears, and the lamp does not light up).
1 Speakers (stereo)
The speakers emit the same audio signal emitted from the
AUDIO (MONITOR OUT) terminals.
(☞ 7 "AUDIO MONITOR OUT (OUT 1, OUT 2) terminals (pin jack)"
on page 8)
2 VOLUME adjustment knob
Adjusts the volume.
3 Picture adjustment knob
PHASE: Adjusts the picture hue.
CHROMA: Adjusts the picture color density.
BRIGHT: Adjusts the picture brightness.
CONTRAST: Adjusts the picture contrast.
● PHASE and CHROMA cannot be adjusted for certain signal
formats.
● When "COMPONENT PHASE" is set to "DISABLE" and an
NTSC signal is input, PHASE can be adjusted (☞ page 18).
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal.
• You can select the color of the tally lamp from "GREEN" or "RED."
(☞ "TALLY SELECT" in "FUNCTION SETTING" on page 18 and "External Control" on page 22)
4 MUTING button
Turns off the sound when no menu screen is displayed (Muting).
● To cancel the function, press the button again or turn the
VOLUME adjustment knob.
●
Muting function is also canceled when "BALANCE" of "AUDIO
SETTING" in the MAIN MENU is changed (☞ page 16).
5
/ / / buttons
When a menu screen is displayed
Selects or adjusts menu items (☞ "Menu Operations" on page
13).
When no menu screen is displayed
Selects the audio channels of EMBEDDED AUDIO signals
(☞ "Audio Channel Selection" on page 11).
● Pressing button while holding
MENU (☞ "Menu Operations" on page 13).
button displays the SET-UP
9
EN EN