Switching The Appliance On And Off; Automatic Preheating - Angelo Po BX61E Manual De Uso

Press the (17) button and the display (12) will show the max. delay start time (1 hour).
Press the (7) button and turn the knob (10) to set the desired value.
Press the knob to store the value and then press the (2) button to begin the delayed start.
To interrupt the countdown and exit from the function, press the (2) button (cooking does
not start).
If you wish to start cooking before the set time has elapsed, press the (7) button and turn the
(10) knob to bring the value displayed (12) to "0".
18) Main switch: for switching the electricity supply to the appliance.

SWITCHING THE APPLIANCE ON AND OFF

Proceed as follows.
Switching on
1) Operate the appliance's master switch to connect
it to the electrical mains.
2) Turn on the water supply tap.
3) Press button (18) to switch on the appliance.
Switching off
Important
Always switch off the appliance after use.
1) Press button (18) to switch off the appliance.
2) Turn off the water supply tap.
3) Cut off the mains electricity supply using the
appliance's master switch.

AUTOMATIC PREHEATING

Important
For best cooking results, preheating should be car-
ried out with the oven empty.
1) Press button (2) to switch on the appliance.
The appliance automatically carries out a
preheating stage.
At the end of the preheating stage a beeper
sounds. You can now fi ll the oven and close the
door. Cooking will start automatically.
Important
Preheating is also automatically disabled when the
temperature inside the cooking chamber is already
high enough for the cooking mode set.
Temperature disabling: this disables the tempera-
ture function for the current cooking operation only.
1) In STOP status (or during a cooking pause with the
light of button (2) constantly on) press button (2)
for longer than one second.
3326460_ut_GB_rev.2
1
REAL
7
INJ
10
- 11 -
18
2
12
GB
ENGLISH