Power Supply; Disposing Of The Scale; Getting Started - Soehnle Professional 9320 Instrucciones De Manejo

PB

Power supply

The scale can be operated on mains power or using the
built-in battery. The battery can be recharged using the
plug-in power adapter. Dispose of defective batteries in
accordance with the national and local regulations for
environmental protection and recycling.

Disposing of the scale

This product is not to be treated as regular household
waste, but should be handed in to an electrical/electronic
equipment recycling centre. You can obtain further details
from your local council, your municipal waste disposal com-
pany or the firm from which you purchased the product.

Getting Started

Unpack all parts::
• Scale
• Platform
• Power cord
• Sealing plug
1. Place the scale on the table with the base facing upwards.
2. Remove the transport restraint from the base using a
screwdriver (should be stored together with the packa-
ging). Seal with the plug.
3. Remove the protective foil.
4. Check the mains voltage.
5. Connect the power cord.
The battery should be charged for at least 12 hours
before putting the scale into operation.
During the charging process, an LED lights up.
6. Install the scale at the point of application.
7. Align the scale horizontally using the adjustable feet
and spirit level.
8. The scale is ready for operation.
ENGLISH
230 VAC
!
50/60 Hz
10 Watt
11