Preparing The Appliance For Operation; Operation Of The Induction Burner - Unold 58105 Instrucciones De Uso

PREPARING THE APPLIANCE FOR OPERATION

1. Remove all packaging materials and transport safety devices. Keep packag-
ing materials away from children - danger of suffocation!
2. Wipe off the appliance with a damp cloth.
3. Place the appliance on a level, solid and dry surface with sufficient clear-
ance on all sides.
4. Plug the power cord into an electrical outlet.

OPERATION OF THE INDUCTION BURNER

Note: Your new burner is equipped with sensor buttons. All settings can be made
with a light touch of the finger. Please do not operate the sensor buttons with
wet fingers, and ensure that you do not place any objects on the buttons, in or-
der to avoid malfunctions.
1. Plug the power plug into an electrical outlet use the EIN/AUS button to
switch on the appliance.
2. A brief signal tone will sound, the indicator lamp of the EIN/AUS button will
be illuminated, the power indicator light (Watt) will flash.
3. Caution: If you do not make any additional settings on the appliance within
one minute, the appliance will switch off.
4. You can control the appliance either by power or by temperature. Press the
"FUNCTION" button to switch between the two modes. The power level or
temperature level can be changed at any time while you are cooking by press-
ing the "+" or "-" buttons. The basic setting for the appliance is 1,200 watt.
5. Place a suitable pot with food to be cooked in the middle of the burner.
Control via heating power
6. Press the "FUNCTION" button once. The "Watt" indicator lamp lights up.
The power level will be shown in the display. Use the "+" and "-" buttons
to change the power level.
7. The following settings are possible:
Model Model 58175
58105
Left
200 W 500 W
400 W 800 W
600 W 1.200 W 1.000 W
800 W 1.500 W 1.200 W
26 von 92
Copyright UNOLD AG | www.unold.de
Right
500
800
Stand 9.3.2020