Operation - Unold Double Pro Plus Instrucciones De Uso

OPERATION

Note: Your new burner is equipped with sensor buttons. With a light touch of the
finger you can make all settings. Please do not operate the sensor buttons with
wet fingers and do not place any objects on the buttons, to avoid malfunctions.
1. Plug the power cord into an electrical outlet (AC230V/10A). A signal tone
will sound, „L" appears in the display. Once the temperature of the cooker
surface is higher than 50°C the "L" will change to "H".
2. Switch off the appliance via the START/STOP button, „ON" will be shown in
the display. If you do not make any other entries via the buttons the appli-
ance will switch off again after a few seconds.
3. You can control the appliance either by the power output or the tempera-
ture. Press the „MENU" button to switch between the two setting modes.
The power or temperature level can be changed at any time when cooking
by pressing the „+" and „-" buttons.
4. Place a suitable pot or pan with food to be cooked in the middle of the
burner.
Control via power
5. Press the „MENU" button once. The „Watt" indicator light is illuminated.
The power level is shown on the display. Change the power level with the +
and - buttons.
6. The following settings are possible:
Model Model 58285
58255
Left
1800 W 1800 W 1300 W
1600 W 1600 W 1200 W
1400 W 1400 W 1100 W
1200 W 1200 W 1000 W
1000 W 1100 W 900 W
800 W 1000 W 800 W
650 W 800 W
500 W 600 W
350 W 400 W
200 W 200 W
Control via temperature
7. To control the appliance via the temperature, press the Function button and
keep it depressed until the indicator light „°C" lights up and the basic set-
ting „240" appears in the display.
Right
650 W
500 W
350 W
200 W
Copyright UNOLD AG | www.unold.de
25