Status Screens - Stihl RMI 632 P Manual De Instrucciones

Ocultar thumbs Ver también para RMI 632 P:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

13 Control Panel / Manual Controller Display Information
2. Automatic mowing status
When automatic mowing is switched on, the
Automatic symbol appears.
3. Charge status
The battery symbol shows the battery's state of charge. For
example:
– No bars: battery discharged
– 1 to 5 bars: battery partially discharged
– 6 bars: full charge.
During charging, the plug symbol is displayed instead
of the battery symbol.

13.2 Status Screens

Different status screens may appear, depending on the
status of the robotic mower.
► Configure the status screen with various information,
@ 15.2.
Status screen when the robotic mower is not in operation
The text "iMow ready for op." and the automatic mowing
status is displayed in the bottom area of the screen.
There are two configurable fields in the top display area.
0478-131-3046-A
Status screen during operation
The text "Attention – iMow starting" and the safety alert
symbol are displayed before a mowing operation starts.
Flashing of the display illumination and a signal tone
additionally indicate the start of the mower.
The text "iMow mowing lawn" and a corresponding symbol
are displayed during an active mowing operation. The text
and symbol will depend on the specific active operation.
Edge mowing: While the robotic mower mows the
edges of the mowing area, the text "Mowing edge" is
displayed.
Drive to docking station: When the robotic mower
returns to the docking station, the relevant reason is
indicated in the display (e.g., "Battery discharged" or
"Mowing completed").
English
45

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido