Installing The Robotic Mower; Preparing The Lawn And The Robotic Mower For; Operation; Setting The Language, Date And Time - Stihl RMI 632 P Manual De Instrucciones

English

10 Installing the Robotic Mower

10.1 Preparing the Lawn and the Robotic Mower for

Operation

To prepare the lawn for installation of the perimeter wire:
► Mow the lawn using a conventional lawn mower. An ideal
grass height is 1.2 in. to 1.6 in. (3 cm to 4 cm).
► If the surface is hard and dry, water the mowing area
lightly in order to make it easier to drive in the perimeter
wire stakes.
To prepare the robotic mower for operation, follow the built-
in installation assistant, which guides you through the initial
installation of the robotic mower:
► Set the time and the date on the robotic mower, @ 10.2.
► Install the docking station, @ 10.3.
► Install the perimeter wire, @ 10.4.
► Connect the perimeter wire to the docking station,
@ 10.5.
► Link the robotic mower and the docking station, @ 10.6.
► Check the installation, @ 10.7.
► Program the robotic mower and create an automatic
mowing plan, @ 12.4.
► Complete the initial installation and begin mowing,
@ 14.5.
Consult an authorized STIHL iMow servicing dealer for
further information on installing the perimeter wire and
setting up the robotic mower. STIHL recommends having an
authorized STIHL iMow servicing dealer set up your robotic
mower.

10.2 Setting the Language, Date and Time

Always set the correct date and time to ensure an accurate
mowing plan and to prevent automatic mowing at unwanted
times.
20
► During the initial installation, press any button on the
control panel / manual controller to activate the installation
assistant.
► Select the desired language and press the OK button.
► Confirm your language selection by pressing the OK
button or select "Change" to repeat the language
selection.
► If prompted, enter the 9-digit serial number of the robotic
mower found on the rating plate behind the control panel /
manual controller.
► Set the current date using the navigation pad and confirm
it by pressing the OK button.
► Set the current time using the navigation pad and confirm
it by pressing the OK button.
10 Installing the Robotic Mower
0478-131-3046-A