Measuring Wire Clearances With The Imow Ruler - Stihl RMI 632 P Manual De Instrucciones

11 Installing the Perimeter Wire
11.3 Measuring Wire Clearances with the
iMow Ruler
1
The perimeter wire (1) can be routed next to surfaces such
as patios and paths as long as the surface is flat, level with
the grass, and allows the robotic mower to travel unimpeded
by obstacles. If necessary, the robotic mower may travel
with one rear wheel outside the mowing area. The maximum
height difference between lawn area and obstacle must not
exceed 0.8 in. (2 cm).
A
D
The STIHL iMow Ruler is designed to help you maintain the
proper the clearances when installing the perimeter wire. It
will help you quickly and easily measure the following
distances:
0478-131-3046-A
A = 3.9 in. (10 cm)
B = 6.7 in. (17 cm)
C = 10.6 in. (27 cm)
B
To ensure that the robotic mower runs without contacting
any obstacle:
C
Increased wire clearance for routing the
perimeter wire around a corner with an obstacle
above the mowing surface, @ 10.4.
Wire clearance for funnel-shaped routing of the
perimeter wire at the start and the end of a
corridor, @ 11.7.
Wire clearance for funnel-shaped routing of the
perimeter wire at the start and end of a corridor,
@ 11.7.
Minimum distance to be maintained between an
obstacle and the perimeter wire.
Wire clearance for routing corridors, @ 11.7.
English
C
35