Basic Operation; Selecting Inputs; Usb/Ipod Operation; Ipod/Iphone Connection - Rotel RSP-1576MKII Manual De Instrucciones

20

Basic Operation

This section covers the basic operating controls of the RSP-1576MKII and
the remote control.

Selecting Inputs

You can select any of the source inputs for listening and/or watching: VIDEO
1 - 7, CD, PHONO, XLR, MULTI INPUT, USB, PC-USB, BLUETOOTH or TUNER.
The source inputs can be customized using the INPUT SETUP menu to assign
which HDMI input to use as the video source. Video 1- 7 inputs can also
be configured to accept any analog and digital audio sources. The default
of audio source is set to HDMI Audio.
When you have configured the source input, you can use Input buttons to
select the desired inputs:
1. Press the Input buttons on the front panel
source input i.e. CD, Tuner, Video 1 etc...
2. Press the source input button on the remote control
desired source.

USB/iPod Operation

iPod/iPhone Connection

5
1. An iPod/iPhone can be connected using the proper USB cable to the
USB front socket of the RSP-1576MKII.
2. The iPod/iPhone will stream a digital music signal to the unit. Music
selection and playback control are available using the iPod/iPhone.
3. The iPod/iPhone screen will remain active while connected to the unit.
Playback Control Buttons
L
Transport controls are available from the remote control during playback
including play, stop/pause, next track, previous track.

Bluetooth

Bluetooth Connection

The Bluetooth feature allows you to stream music wireless from your Bluetooth
enabled device, i.e. mobile phones. Select the BLUETOOTH (BT) input on
the RSP-1576MKII. From your device (mobile phones etc.) activate Bluetooth
and allow it to search for other Bluetooth devices. Select "Rotel Bluetooth"
and connect to it. Once connected you can start streaming music to the
RSP-1576MKII.
NOTE: The RSP-1576MKII Bluetooth is APTX compatible. This enables
you to stream music at lossless CD quality.
NOTE: Some Bluetooth devices may require you to establish connection
again with the RSP-1576MKII if the unit was powered off. If this occurs,
please go through the above steps to re-connect.
4q
to switch to the selected
M to select the
RSP-1576MKII Surround Sound Processor

Rear PC-USB

Rear PC-USB Connection

The rear USB socket labeled PC-USB accepts a type B USB plug. This input
accepts PCM audio signals sent from your computer up to 24 bits/192kHz
resolution.

Setup

The Rotel RSP-1576MKII features two types of information displays to help
operate the system. The first consists of simple status displays that appear on
the TV screen whenever primary settings (Volume, Input, etc.) are changed.
A more comprehensive ON-SCREEN DISPLAY (OSD) menu system is available
at any time by pressing the SETUP
menus guide you through the configuration and setup of the RSP-1576MKII.
The settings made in the configuration process are memorized as default
settings and need not be made again for normal operation of the unit.
The OSD menus can be configured to display several different languages.
The default English version of all main menus are shown at the front of this
manual. If your language is available, those menus will be shown in the
instructions. If you would like to change from the default English language
before proceeding, go to the instructions for the SYSTEM SETUP menu later
in this manual. From this menu, you can change the language display.

Menu Basics

Navigation Buttons

The following remote control buttons are used to navigate the OSD menu
system:
SETUP button: Press to display the MAIN MENU. If a menu is already
visible, push this button to close the OSD and return to normal operation.
Up/Down buttons: Press to move up and down in the lists of menu items
that appear on the OSD screens.
Left/Right buttons: Press to change the current settings for a selected menu
item on OSD screens.
ENTER button: Press ENTER to confirm a setting.
BACK Button: Press BACK to go back to the previous menu.
H
button on the remote. These OSD