Analog Stereo; Basic Operation; Selecting Inputs; Usb/Ipod Operation - Rotel RSP-1582 Manual De Instrucciones

22
signal to 2 channel stereo mode. The PLCM button on the remote control will
toggle between Dolby PLIIx Cinema (Movie), Music or Game.
NOTE: Not all surround modes are available for all surround source
formats. The input source signal will determine the available surround
options that can be selected.

Analog Stereo

This type of recording includes any conventional stereo signals from the
processor's analog inputs, including analog audio from CD players, FM
tuners, etc.
Analog stereo inputs require a choice about how the signal is routed through
the processor. One option is the analog bypass mode. In this mode, the
stereo signal is routed directly to the volume control and the outputs. This
mode is pure 2-channel stereo, bypassing all of the digital circuitry. None
of the bass management features, speaker level settings, EQ settings, or
delay settings is active. There is no subwoofer output. A full-range signal is
sent directly to the front left and right speakers.
The other option converts the analog inputs to digital signals, passing them
through the digital processors in the RSP-1582. This option allows all of
the features to be active including bass management settings, crossovers,
subwoofer outputs, EQ settings, etc. In this mode, you can select several
surround modes including 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH
Stereo modes. You can also use Dolby Pro Logic II or Pro Logic IIx surround
or DTS Neo:6 surround modes.
To change the surround mode press the SUR+ button on the remote control
or front panel control to toggle through the available surround options. The
PLCM button on the remote control will toggle between Pro Logic IIx Cinema
(Movie), Music or Game.
NOTE: Not all surround modes are available for all surround source
formats. The input source signal will determine the available surround
options that can be selected.

Basic Operation

This section covers the basic operating controls of the RSP-1582 and the
remote control.

Selecting Inputs

You can select any of the source inputs for listening and/or watching: VIDEO
1 - 8, CD, PHONO, XLR, MULTI INPUT, USB, PC-USB, BLUETOOTH or TUNER.
The source inputs can be customized using the INPUT SETUP menu to assign
which HDMI input to use as the video source. Video 1- 8 inputs can also
be configured to accept any analog and digital audio sources. The default
of audio source is set to HDMI Audio.
When you have configured the source input, you can use INPUT buttons
to select the desired inputs.
1. Press the INPUT buttons on the front panel
buttons to switch to the selected source input i.e. CD, Tuner, Video 1 etc.
then press ENTER.
2. Press the source input button on the remote control
desired source:
6
and use the navigation
M to select the
RSP-1582 Surround Sound Processor
NOTE: In addition to selecting analog or digital signals, the
configuration options also permit custom labeling for all inputs and
selection of a default surround mode for each of video inputs.

USB/iPod Operation

iPod/iPhone Connection

0
1. An iPod/iPhone can be connected using the proper USB cable to the
USB front socket of the RSP-1582.
2. The iPod/iPhone will stream a digital music signal to the unit. Music
selection and playback control can be made from the iPod/iPhone.
3. The iPod/iPhone screen will remain active while connected to the unit.
Playback Control Buttons
L
Transport controls are available from the remote control during playback
including play, stop/pause, next track, previous track.

Bluetooth

Bluetooth Connection

The Bluetooth feature allows you to stream music wireless from your Bluetooth
enabled device, i.e. mobile phones. Select the BLUETOOTH (BT) input on
the RSP-1582. From your device (mobile phones etc.) activate Bluetooth and
allow it to search for other Bluetooth devices. Select "Rotel RSP-1582" and
connect to it. Once connected you can start streaming music to the RSP-1582.
NOTE: The RSP-1582 Bluetooth is APTX compatible. This enables you
to stream music at lossless CD quality.
NOTE: Some Bluetooth devices may require you to establish connection
again with the RSP-1582 if the unit was powered off. If this occurs,
please go through the above steps to re-connect.

Rear PC-USB

Rear PC-USB Connection

The rear USB socket labeled PC-USB accepts a type B USB plug. This input
accepts PCM audio signals sent from your computer up to 24 bits/192kHz
resolution.
NOTE: You may need to install the USB driver located on the CD
supplied with the RSP-1582 if your computer does not recognize the
RSP-1582 as an audio driver after the cables have been connected.
NOTE: Mac computers do not require a driver.