Reinstalling The Fuel Tank; Purging The Air From The Forks - SHERCO SE 250i Manual De Propietario

reinsTalling THe FUel TanK

PUrging THe air FrOM THe FOrKs

1
Reassembly of the fuel tank.
Be sure to correctly position the throttle
clutch cable
Locate all of the fuel hoses / electrical connec-
1
tions under the fuel tank well.
2
Install the tank by moving the radiator guards
away from the radiator to provide clearance for
the fuel tank and makesure that all of the cables,
wires and hoses are free, clear and not pinched.
Check the adjustment of the radiator guards in
relationship to the fuel tank.
5
Connect the fuel line
tion
4
Install the fuel tank mounting screws
with their rubber inserts.
Install the radiator grill mounting screws.
Chassis screws
3
Install the fuel vent hose.
4
Reinstall the saddle (
5
After some time of operation, the air accumulates
under pressure in the fork.
Every 5 to 10 hours (depending on the riding
intensity), it should be purged. With the fork cold
and fully extended, loosen and then retighten
both fork caps.
.
2
and electric connec-
3
.
M6
p.96)
☛
and
1
along
5
10Nm
99