2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +45 °C
Relative humidity: max. 90%, non-condensing
Moisture: fresh water and salt water as splashing water, sweat
Unallowable environmental conditions
Mechanical vibrations or impacts
Acids
Dust, sand, highly hygroscopic particles (e.g. talcum), smoke
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or
CAUTION
injury.
3.2 General safety instructions
CAUTION
Contact with heat, embers or fire
Risk of injury (such as burns) and risk of product damage.
► Keep the product away from open flames, embers and other
sources of heat.
CAUTION
Reuse on another patient
Risk of injury due to loss of functionality as well as damage to the
product
► Only use the product for a single patient.
6
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readi
ness for use.
► In case of changes in or loss of functionality, do not continue
using the product (see "Signs of changes in or loss of functional
ity during use" in this section).
► Take any necessary measures (e.g. repair, replacement, inspec
tion by the manufacturer's customer service, etc.).
NOTICE
Improper use and changes
Change in or loss of functionality as well as damage to the product
► Use this product with care and only for its intended purpose.
► Do not make any improper changes to the product.
Signs of changes in or loss of functionality during use
Instability or lack of joint function indicate a loss of function.
4 Scope of delivery
The following single components and accessories are included in the
scope of delivery in the specified quantities and are available for
reordering as single components ( ), single components with minim
um order quantities ( ) or single-component packs ( ):
15K10 modular foam kit
Fig.
Item
Quant
Designation
ity
–
–
1( )
Instructions for use
1
–
1( )
Forearm moulded foam
part
Reference
number
647G456
–