Tubing And Faceplate Cleaning - Medela Pump In Style Advanced Instrucciones De Uso

1. Cleaning (cont.)
Caution
• Do not store wet or damp parts as
mold may develop.
• If tubing becomes moldy, discontinue
use and replace tubing. Contact
Medela Customer Service at
customer.service@medela.com or
1-800-435-8316.
Note
• Tubing should be washed if dirty or
milk is present. Follow instructions in
Section 1.4.
12
1.4 Tubing and faceplate
cleaning
Clean the faceplate monthly. Also,
inspect tubing after each pumping
session. Clean tubing and faceplate if
there is any sign of condensation and/
or milk.
1
Turn off breastpump.
4
Remove tubing from
breastshield.
2
Unplug breastpump from
power source.
5
Rinse tubing in cool water to
remove breastmilk.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Remove tubing by pulling
straight out of tubing ports. Do
not wiggle or pull tubing at an
angle.
6
Continued
next page.
• Wash tubing in warm soapy water.
• Rinse tubing with clear water.
• Hang to air dry.
13