Fixing To The Ground; Identification Of Parts - ATT NUSSBAUM TC 205 Manual De Instrucciones

ENGLISH • Instructions manual

6.4 FIXING TO THE GROUND

1) Prepare the following tools:
N. 1 - Hex spanner 13
N. 1 - Electric drill
N. 1 - Concrete drill bit diam. 13 long
N. 2 - Metal expansion screw anchors 13x50
N. 2 - M 8 x 50 anchor screws.
2) Position the fixing brackets in the slots in the front upper left and rear right of the tyre
changer (see Fig. B).
3) Using a 13 mm masonry bit, drill a hole to a depth of 80 mm corresponding to the hole on
the bracket (on the tyre changer).
4) Insert the expansion plugs and tighten with the 13 mm spanner.
B
7. IDENTIFICATION OF PARTS (FIG. E)
1- Table top rotate pedal
11
2- Table top
9
3- Bead breaker (loosener) pedal
4- Bead breaker arm
5- Table top clamp opening/closing pedal
10
6- Wheel clamp
16 8
7- Tilting column pedal
6
12
8- Tilting column
9- Control arm handle
10- Hexagonal arm
2
4
11- Horizontal arm
12- Filter and lubricator
13- Rubber tyre rest
14- Bead breaker (loosener) blade
14
15- Tyre lever
7
16- Mounting/demounting head tool
13
15
E
5
3
1
TC 205 - Liga C 220
26