Care & Cleaning - Breville BOV450 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care & Cleaning
Ensure the oven is turned OFF by pressing
the START/CANCEL button on the control
panel. The oven is OFF when the button
surround illumination is no longer red and the
LCD is illuminated blue. Remove the power
plug from the power outlet. Allow the oven
and all accessories to cool completely before
disassembling and cleaning.
NOTE
Do not use abrasive cleansers, metal scouring
pads or metal utensils on any of the interior
or exterior surfaces of the oven, including
the crumb tray.
Do not use abrasive cleansers, metal scouring
pads or metal utensils to clean any of the
accessories as they may damage the porcelain
enamel finish of the baking pan.
Cleaning the bowl and outer body
1. Wipe the outer body with a soft, damp
sponge. A non-abrasive liquid cleanser or
mild spray solution may be used to avoid
build-up of stains. Apply the cleanser
to the sponge, not the oven surface,
before cleaning.
2. To clean the glass door, use a glass cleaner
or mild detergent and a soft, damp sponge
or soft plastic scouring pad. Do not use an
abrasive cleanser or metal scouring pad as
these will scratch the oven surface.
3. Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the oven ON.
IMPORTANT
Do not immerse the body, power cord or power
plug in water or any other liquid as this may
cause electrocution.
Cleaning the interior
The walls on the inside of the oven feature a
non-stick coating for easy cleaning. To clean
any spattering that may occur, wipe the walls
with a soft, damp sponge. A non-abrasive
liquid cleanser or mild spray solution may be
used to avoid build-up of stains. Apply the
cleanser to the sponge, not the oven surface,
before cleaning. Avoid touching the quartz
heating elements.
IMPORTANT
Use extreme caution when cleaning the
quartz heating elements. Allow the oven
to cool completely, then gently rub a soft,
damp sponge or cloth along the length of the
heating element.
Do not use any type of cleanser or cleaning
agents. Do not use any standard oven cleaner
to clean the interior of the oven as this will
deteriorate the metal surface.
Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the oven ON.
Cleaning the crumb tray
1. After each use, allow the oven to cool
and slide out the crumb tray and discard
crumbs. Wipe the tray with a soft, damp
sponge. A non-abrasive liquid cleanser may
be used to avoid build-up of stains. Apply
the cleanser to the sponge, not the tray,
before cleaning. Dry thoroughly.
2. To remove baked-on grease, soak the tray
in warm soapy water then wash with a soft
sponge or soft plastic scouring pad. Rinse
and dry thoroughly.
3. Always ensure to re-insert the crumb tray
into the oven after cleaning and prior to
inserting the power plug into a power outlet
and turning the oven ON.
41

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido