baltur TBML 600 ME Manual De Instrucciones página 17

FLUIDICS NOZZLE WITHOUT PIN
For diesel operation, use nozzles model FLUIDICS N2 45° without
pin for 600 kg/h or 800 kg/h, depending in the maximum regulated
thermal rate.
Diagram 0002922840 represents the curves showing the values
of the fuel flow rate delivered by the two nozzles depending on the
PUMP CONNECTION DIAGRAM HP MODEL VBH
A Intake 1"¼
B Diesel delivery to burner
C Diesel return from pump
D 1"¼ connection for diesel return
E Vacuum gauge connection ( ⅛ )
F Pressure gauge 0 ÷ 30 bar
FLOW RATE REGULATOR CONNECTION DIAGRAM
Diesel inlet from nozzle return
Cock
Pressure gauge with scale 0-40
bar for measuring the nozzle return
pressure
return pressure. The curves were obtained by considering a diesel
pump regulating pressure of 25 bar.
The return pressure value is to be measured on the pressure gauge
with scale 0-40 bar of diagram 0002901670.
Servomotor rotation indicator
position 6: flow rate regulator closed, maximum flow rate delivered by the nozzle.
position 0: flow rate regulator completely open, minimum flow rate delivered by
the nozzle.
15 / 28
0006081557_201310
NOZZLE RETURN PRESSURE (bar)
Diesel outlet on
pump return
Diesel flow rate regulator