Adjusting The Telescoping Shaft; Fitting The Harness - Stihl HT 75 Manual De Instrucciones

Adjusting the Telescoping
Shaft
WARNING
Always shut off the engine and fit the
chain guard
Loosen the screw.
N
Adjust shaft to the required length.
N
Tighten down the screw firmly.
N
HT 75

Fitting the Harness

The type and style of the harness
depend on the market.
Shoulder strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap.
N
With the power tool attached, the
N
carabiner (2) must be at about the
same height as your right hip.
Full harness
1
1
3
Put on the full harness (1) and
N
sling (2) as described in the
instruction sheet provided.
Adjust the harness and thigh
N
strap (3) as required.
Rest the powerhead in the sling
N
during cutting work.
English
2
61