Devicenet; Addressing; Baud Rates; Meaning Of Leds - Aventics DeviceNet VS LP04 Instrucciones De Servicio

AVENTICS | DeviceNet | R402000617–BDL–001–AC
4.1

DeviceNet

DeviceNet is a CAN protocol that is based on a clear master/slave
connection. Several masters can share a physical CAN data line and can
control different slaves. A slave is, however, only assigned to one master
and can only exchange data with that master. A master can release a
slave, which can then be requested and operated by another master.
4.2

Addressing

The units and tens digits for the module ID are switched by the rotary
switches. IDs from 0 to 63 are allowed. Module IDs > 63 are set to
MAC-ID 63.
4.3

Baud rates

Table 3: Setting the baud rates
Baud rate
500 kBd
250 kBd
125 kBd
1)
Rocker towards the valves
2)
Rocker away from the valves
4.4

Meaning of LEDs

Fig. 2: LED locations
SW1 bit 1
2)
OPEN
1)
CLOSE
1)
CLOSE
19
The bus coupler
SW1 bit 2
1)
CLOSE
2)
OPEN
1)
CLOSE