GE Uniflux 10 Instrucciones De Funcionamiento página 196

A Create a method with UNICORN 5
A.2 An example of using the Method Editor
A.2.2 Create the method
Step
3
196
Action
This instruction is required to avoid repeated display of the warning message
"No flow in beginning of method".
1 In the Text pane, select the Base Time instruction.
2 In the Instruction box, do the following settings:
Set Breakpoint to 0.00 min.
•
In the Instructions group box, select Other and Flow_Warning.
•
In the Parameters field, set Mode to Disabled.
•
Click the Insert button.
•
The new instruction will now show up in the Text pane below Base Time.
UniFlux 10 Instrucciones de funcionamiento 28993587 AE