GE Uniflux 10 Instrucciones De Funcionamiento página 221

Step
2
3
Create a block
Follow this general procedure to create a block in the Method Editor.
Step
1
2
UniFlux 10 Instrucciones de funcionamiento 28993587 AE
Action
When the User Defined phase has been added to the Method Outline, the
phase name is enabled for editing.
Type a name for the phase and press the Return keyboard key.
Note:
The User Defined phase is marked with the letter T, meaning that it is text
edited. This phase contains only Base and End_Block instructions, so any
functional instruction must be added manually.
To include instructions for the User Defined phase, select the Text Instruc-
tions tab and text edit the method.
Note:
The Phase Properties tab will show a list of variables used in the phase.
Action
In the Instruction Box:
In the Instructions: list, select Other and Block.
In the Parameters for field, type an appropriate name.
B Create a method with UNICORN 6 and above
B.1.1 Introduction to the Method Editor
B.1 The Method Editor
221