GE Uniflux 10 Instrucciones De Funcionamiento página 188

A Create a method with UNICORN 5
A.1 The Method Editor
A.1.2 Method Editor layout
•
Note:
Instructions placed at the same breakpoint will execute simultaneously, while blocks will
execute in the order they occur in the Text pane.
Changing valve positions, or changing the speed of the pump does not take place mo-
mentarily, but requires a small amount of time. A small time lag, such as 0.10 min, should
therefore be introduced after time-based instructions affecting mechanical components.
Note:
188
Buttons — There are four buttons: Insert, Change, Replace, and Delete. Change,
Replace and Delete affect the instruction or block currently selected in the Text pane.
Insert adds a new instruction before, or after (if it has the same breakpoint as an old
instruction), the current selection.
Changing the Breakpoint of an instruction using Change will move not
only the instruction, but also all subsequent instructions in the block. Using
Replace moves only the selected instruction.
There is no undo-function in UNICORN para BioProcess and you are
therefore recommended to regularly save the method you are working
with, preferably using different version numbers.
UniFlux 10 Instrucciones de funcionamiento 28993587 AE