Method Editor Layout - GE Uniflux 10 Instrucciones De Funcionamiento

B.1.2

Method Editor layout

Text Instructions tab
Click the Method Editor window from UNICORN by selecting it in the task bar at the
bottom of the screen.
The Text Instructions tab contains an
overview of the method in the form of an ex-
pandable list with all phases, blocks and in-
structions in the method. Phases and blocks
are marked by blue square symbols. The figure
to the right shows a method with several
phases, blocks and instructions. For a newly
created method, only the Method Settings
phase is shown in the Method Outline.
The list in the Text Instructions tab has a tree
structure and individual blocks can be expand-
ed or contracted, as indicated by the + or -
signs. When expanded, all the block instruc-
tions and nested blocks are displayed and
available for editing.
Editing is done in the Instruction Box below
the Text Instructions tab.
Instruction Box
The parameters for the block or instruction that is currently selected in the Text Instruc-
tions tab are displayed and available for editing in the Instruction Box below the Text
Instructions tab.
UniFlux 10 Instrucciones de funcionamiento 28993587 AE
B Create a method with UNICORN 6 and above
B.1 The Method Editor
B.1.2 Method Editor layout
223