Introduction To The Method Editor - GE Uniflux 10 Instrucciones De Funcionamiento

B Create a method with UNICORN 6 and above
B.1 The Method Editor
B.1.1 Introduction to the Method Editor
B.1.1

Introduction to the Method Editor

Description
The Method Editor is used to build new methods in a step-by-step manner using phases,
blocks and instructions as building elements. The Method Editor can also be used to
edit already existing methods.
Phases and blocks
Phases and blocks are used to organize instructions into functional units. A phase may,
for instance, contain instructions for washing a filter/cartridge. Phases and blocks can
be nested (i.e., a block can contain other blocks).
Phases and blocks are useful for organizing instructions and structuring methods, and
also allow for reuse of existing sets of instructions. Individual phases and blocks can be
moved and used in any method (within the same configuration) as required.
For detailed descriptions of phases and blocks, refer to the UNICORN manuals.
Note:
Create a phase
A new empty method has the Method Settings phase in the Method Outline.
The table below describes how to add a phase to the Method Outline using drag-and-
drop.
Step
1
220
There are no predefined phases for the UniFlux 10 systems.
Action
Select the User Defined phase in the Phase Library pane and drag-and-
drop the phase to the requested position in the Method Outline pane.
Result: The phase is included in the method at the requested position.
UniFlux 10 Instrucciones de funcionamiento 28993587 AE