PROHEAT II SERIES · HEAT PUMP AIR/WATER SYSTEM
4.2.
TECHNICAL CHARACTERISTICS
Main technical data of the machines of the PROHEAT II series:
•
PROHEAT II, standard and chiller models, consult:
TABLE 1: TECHNICAL DATA [STANDARD & CHILLER], pág. 89.
•
PROHEAT II, indoor models, consult:
TABLE 2: TECHNICAL DATA [INDOORS], pág. 90.
4.3.
ELECTRICAL CHARACTERISTICS
Electrical control panel for complete process control and to guarantee optimum performance
with minimum power consumption at all times. Containing the following components:
•
Circuit breakers.
Contactors and thermal relay
•
•
Interconnection and ground terminals.
•
Card controller and Display.
•
Power Supply.
Main electrical data of the PROHEAT II machine series:
•
PROHEAT II, standar and chiller models, consult:
TABLE 3: MAXIMAL ELECTRICAL DATA [STANDARD & CHILLER], pág. 91.
•
PROHEAT II, indoor models, consult:
TABLE 4: MAXIMAL ELECTRICAL DATA [INDOORS], pág. 91.
A general rule for the power cable is: section of 1 mm
lengths of up to 20 meters, although this rule has to be verified and adapted for each
installation and for lengths of more than 20 meters and always in accordance with local
requirements / regulations.
4.4.
ELECTRICAL DIAGRAMS
To look up electrical diagrams of the different equipment, consult
•
PROHEAT II, all equipment with 90 35 kW, 45 kW y 60 kW, consult:
IMAGE 1: ELECTRICAL SCHEME [35kW, 45kW & 60kW], pág. 92.
•
PROHEAT II, all equipment with 90 kW y 120 kW, consult:
IMAGE 2: ELECTRICAL SCHEME [90kW, 120kW], pág. 94.
4.5.
SIZE
To look up the dimensional data and weight of the product PROHEAT II, see:
PROHEAT II standard and chiller models, consult:
•
IMAGE 3:
PROHEAT II STANDARD & CHILLER DIMENSIONS, page 96.
•
PROHEAT II indoors models, consult:
IMAGE 4:
PROHEAT II INDOORS DIMENSIONS, page. 96.
© FLUIDRA 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
ENGLISH
2
for every 5 amps for cable
Pag: 14