Kit Installation Steps - Fermax KITS EVOLUTION AVISA Manual Instalador

Kits EVOLUTION
Kits EVOLUTION
Evolution Kit Installation Steps
Now, the minimum steps required for correct installation and configuration of the Kit are detailed:
INSTALLATION:
1º.-
Wiring the installation (according to wiring diagram)
(See Installer's Manual : «Diagrams and Wiring» ).
2º.-
Installing and connecting the components
(See Installer's Manual : «Diagrams and Wiring» ).
3º.-
Power supply and checking the installation
4º.-
Monodecoder programming.
(See Installer's Manual : «Monodecoder Programming»).
PERSONALISED CONFIGURATION of the system (From the monitor)
5º.-
Program Zone 1 Entry/Exit Delay (E/E)
(See Installer's Manual: «Configure Alarm Zones »).
6º.-
Configure monitor F key action
(See Installer's Manual: «Monitor Configuration >>Multifunction Button»).
7º.-
Configure Monodecoder Relay timings
(See Installer's Manual: « Monodecoder Relay Configuration Relay»).
8º.-
Configure Telephone Dialler (Included in Avisa Kit. Optional for Detecta4 Kit)
(See Telephone Dialler Manual ).
Pag 7