Canon EOS REBEL T6S Manual De Instrucciones página 103

Selecting the AF Point Manually
You can manually select the AF point or zone. If 19-point automatic
selection AF + AI Servo AF has been set, you can select any position
where AI Servo AF is to start.
<5>
Press the <S> or <B> button
1
.
(9)

The AF points will be displayed in the
viewfinder.
In the Zone AF mode, the selected

zone will be displayed.
Select an AF point.
2
You can select an AF point by shifting

<6>
horizontally with the <6> dial or
vertically with the <5> dial. If you
press <0>, the center AF point (or
center zone) will be selected.
In the Zone AF mode, turning the

<6> or <5> dial will change the
zone in a looping sequence.
You can also select an AF point or

zone by shifting horizontally with the
<Y> <Z> keys or vertically with the
<W> <X> keys.
S Selecting the AF Area and AF PointK
103