Selecting The Connection Destination - Canon EOS REBEL T6S Manual De Instrucciones

Selecting the Connection Destination

Register the target camera to connect to via a wireless LAN. The
camera can be connected to only one camera at a time.
W-36
Select [Wi-Fi function].
1
Under the [51] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [z].
2
Select [z] (Transfer imgs between

cameras), then press <0>.
Start the connection on the target
3
camera.
When the screen on the left is

displayed on the camera, start the
connection on the target camera as
well. For the operation procedure,
refer to the instruction manual of the
target camera.

When a connection is established,
the settings are saved and an image
on the card is displayed.