Basic Operation And Settings - Canon EOS REBEL T6S Manual De Instrucciones

Basic Operation and Settings

The basic operation for setting the camera's wireless LAN functions is
explained here. Follow the procedures below.
W-8
Select [Wi-Fi/NFC].
1
Under the [51] tab, select [Wi-Fi/

NFC], then press <0>.
Select [Enable].
2
Press the <Z> key to select

[Enable], then press <0>.
When this setting is selected for

the first time, a screen to register a
nickname (for identification) is
displayed. See page W-14 to
register a nickname.

[Wi-Fi function] under the [51] tab is
now selectable.
When it is set to [Enable], all

connections via the DIGITAL and
HDMI terminals will be disabled.
[Eye-Fi trans.] will be set to
[Disable].
Select [Wi-Fi function].
3
Under the [51] tab, select [Wi-Fi

function], then press <0>.