Canon EOS REBEL T6S Manual De Instrucciones página 60

d Using the Touch Screen
3 Touch Control Settings
Cautions for Touch Screen Operations
Since the LCD monitor is not pressure sensitive, do not use any sharp

objects, such as your fingernail or a ballpoint pen, for touch operations.
Do not use wet fingers for touch screen operations.

If the LCD monitor has any moisture or if your fingers are wet, the touch

screen may not respond or misoperation may occur. In such a case, turn
off the power and wipe the LCD monitor with a cloth.
Do not attach any protective sheet (commercially available) or sticker on

the LCD monitor. It may make the touch operation response slow.
If you quickly perform touch operation when [Sensitive] is set, the touch

response may be slower.
60
Select [Touch control].
1
Under the [53] tab, select [Touch

control], then press <0>.
Set the touch control setting.
2
Select the preferred setting, then

press <0>.
[Standard] is the normal setting.

[Sensitive] provides a more reactive

touch response than [Standard]. Try
using both settings and select the one
you prefer.
To disable touch-screen operations,

select [Disable].