Canon EOS REBEL T6S Manual De Instrucciones página 99

One-Shot AF for Still Subjects
AF point
Focus indicator
While you hold down the shutter button halfway, the focus will be

locked. You can then recompose the shot if desired.
AI Servo AF for Moving Subjects
This AF operation is suited for moving subjects when the focusing
distance keeps changing. While you hold down the shutter button
halfway, the subject will be focused on continuously.
The exposure is set at the moment the picture is taken.

When the AF area selection mode is set to 19-point automatic

selection AF (p.101), the camera first uses the manually-selected AF
point to focus. During autofocusing, if the subject moves away from
the manually-selected AF point, focus tracking continues as long as
the subject is covered by the Area AF frame.
AI Focus AF for Switching the AF Operation Automatically
AI Focus AF switches the AF operation from One-Shot AF to AI
Servo AF automatically if a still subject starts moving.
After the subject is focused on in One-Shot AF, if the subject starts

moving, the camera will detect the movement, change the AF
operation automatically to AI Servo AF, and start tracking the moving
subject.
f: Changing the Autofocus OperationK
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
When focus is achieved, the AF point

that achieved focus will be displayed,
and the focus indicator <o> in the
viewfinder will also light up.
With evaluative metering, the

exposure setting will be set at the
same time focus is achieved.
99