Changing The Mains Fuse - John Bean B 2000P Manual Do Operador

2
8-8
208
1
3
Maintenance
WA R N I N G : B E F O R E AT T E M P I N G A N Y
MAINTENANCE OR REPAIRS, DISCONNET
THE ELECTRICAL POWER SUPPLY FROM THE
BALANCER.
8.4

Changing the mains fuse

Refer to Figure 8-8.
• Switch off the unit.
• Unplug the power cable from the power outlet.
• Remove the power cable from the machine mains
socket (1).
• Pull out the fuse holder (2).
• Replace the damaged fuse with another fuse having
an identical rating (3).
• Return the unit to its original functioning state, by
following the steps above in reverse.
.. ..........
_