John Bean B 2000P Manual Do Operador página 34

1 2
4-8
A
B
4-9
4-10
34
Layout
Fig. 4-8
Settings Screen.
Opened using the SETTINGS key (9b, Fig. 4-5).
Commands:
1 - HELP key - For selecting HELP texts.
2 - HOME key - Returns you to the starting screen
page MAIN MENU (INTRO SCREEN).
3 - PRINT key - For managing print-outs, to be sent to
the printer, to the USB key or Network, based on the
SETTINGS (
4 - ESC key - Returns you to the MAIN MENU.
3 4
Note: Directly press the items in the list to select the
desired options. To change parameters, manually turn
the wheel shaft. When the required value is reached,
press it to enter it and complete the selection.
Fig. 4-9
Counters Screen.
Open using the key for SETTINGS (9b, Fig. 4-5) /
Counters (A, Fig. 4-9).
The screen pages for Counters and System Information
(B, Fig. 4-9), both accessible from the Settings Screen
Page, do not have parameter selection commands.
Instead, they respectively show Statistical Information
and information about the machine System.
Counters Screen Page list:
- Total Measuring Runs
- Measuring Runs with result OK
- Optimisation Cycles
- Assistance Service Runs
- Runs since last Calibration
- Wheel Clamping Cycles
Fig. 4-10
The Text Composition (Fig. 4-10), is used to set and
memorise a five line text in the Start screen.
The text composition is performed directly in the Set-
tings screen, at the General settings item (
— Select the "General Settings" category in the
SETTINGS screen, then select one of the 5
parameters in the central panel "Promotional Text".
After the selection a keyboard is displayed with the
text entry fi eld.
SETTING
6.4.1.1).
F
COUNTERS
TEXT COMPOSITION
.. ..........
_
9.6).
F