Hofmann EEWB746A Manual Del Operador página 67

67
5-33
5-34
5-35
5-36
5-37
Operation
5.10.3 Start optimization/weight
minimisation.
Procedure:
 Make sure the tyre is correctly mounted on
rim and inflated to specified inflation pressure
(mounting guide rib of the tyre must be correctly
seated).
 Clamp the wheel.
 Enter correct rim dimensions, or check existing
inputs for correctness.
 Press the START key after wheel protection
 Starting from the main menu press the menu key
F6 optimisation menu (Fig. 5-33).
The oPTiMiSATioN MENu "oP.1" screen (Fig. 5-34)
is displayed.
if an optimisation/weight minimisation result has
already been saved, press the F4 key (Fig. 5-35);
The program then continues from the step 4, 6 or 10 where it was
interrupted, with the relative measurement values and the balancing
optimisation / weight minimisation may continue.
Start weight minimisation
 Press the menu key F2 (Fig. 5-34).
The MiNiMiSATioN "un.4" screen is displayed (Fig.
5-36).
Start weight optimisation
 Press the menu key F1 (Fig. 5-34).
The oPTiMSATioN "OP.2" screen (Fig. 5-37) is
displayed.
Continue opimisation or weight minimisation
 Press the menu key F4 (Fig. 5-35).
Resumes the previously interrupted process.
Operator's Manual
closing.
EEWB746A