Gima CMS-M Manual Del Usuario página 34

ENGLISH
34
Fig.4-2 Main Menu
1) Contrast value setting
On the main menu interface, by moving the upper wheel key to the left or right
can move the menu choice bar to "Alarm", Then press the wheel key down,
a small triangle will display on the right of "Alarm" (see figure 4-2), then move the
wheel key to the left of right again to enter the alarm setting menu of figure.
Choose "contrast" option, the parameter shows "025" (see figure 4-3), then
move the wheel key to the left or right,each move of wheel key, the data will
raise or descend for one time accordingly(setting range: 15~35, default is 25,
the value will turn to 25 when the setting value is beyond the limits.
After setting,press the wheel key down to save and exit the option.
Fig. 4-3 Contrast value setting
2) Alarm setting
Choose "Alarm" option, then press the wheel key down, a small triangle will
display on the right of "Alarm" (see figure 4-4a), here move the wheel key to the
left or right again to enter the alarm setting menu of figure 4-4b.