Promax PROLINK-4/4C Premium Manual De Instrucciones página 154

Tuning purposes: turning it clockwise frequency increases while turning it
anticlockwise frequency decreases.
To shift along the on-screen menus: turning it clockwise active option moves
downwards while turning it anticlockwise active option moves upwards.
In TV mode, press the rotary selector-button to display the first sub-menu containing
different functions, some are dependent on the band and the standard:
Band switching
System & Standard Selects the colour system (PAL, SECAM or NTSC) and the
Battery & Lnb
Channel set
Channel BW
Teletext
DiSEqC
Reference noise
Press Next for the second sub-menu:
Datalogger
IF Inversion
Sat IF Test
Wi-Fi
Input Video
C/N setup
Page 18
Permits to change from terrestrial (5-862 MHz) to satellite
band (900-2150 MHz) and vice versa.
TV standard (B/G, D/K, I, L, M, N or Digital).
Displays battery voltage and external units power supply
voltage and current (V Ext and I Ext).
Selects active channels table.
(Satellite band or digital channels). Defines channel
bandwidth. Indispensable for measuring digital channels
and satellite band channel C/N.
Sets teletext information.
(Only satellite channels). Defines a sequence of DiSEqC
commands and permits to send them.
(Only in C/N Reference noise mode). Defines the frequency
where measure the noise level.
Permits to acquire and to store up to 9801 measurements
automatically.
(Only in the terrestrial band) Once tuned an IF signal (38.9
MHz) by means of activating this function is possible to
demodule correctly the video and the audio.
(Only satellite band, analogue channels). This selects the
function for testing satellite distribution networks.
(Only in satellite band). This selects the function for testing
wireless communication networks.
Enables Scart commutation signals to be activated,
deactivated or set to automatic/subordinate mode.
Defines the C/N measuring method between Auto or
Referenced.
USER'S MANUAL. PROLINK-4/4C Premium
06/2005