Promax PROLINK-4/4C Premium Manual De Instrucciones página 156

Medidor de nivel tv digital & sat avanzado
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

In case of erroneous selection of a language, the user must follow the following steps to
accede again to the language selection menu (Language, Idioma, Sprache, Lingua o
Langue):
From the TV mode, press the rotary selector, it will appear the first sub-menu of
functions (Functions, Funciones, Funktionen, Funzioni, Fonctions), turn the rotary
selector to move the cursor to the position (Next, Siguiente, Nächst, Seguente or
Suivant) and press it to accede again to the second sub-menu. Repeat the operation to
accede to the third sub-menu. Finally, move the cursor to the fourth line of the sub-
menu and press the rotary selector to accede to the language selection menu.
Also you can access to the language selection menu activating the reset process, for it
the reset button [36] must be pressed when the instrument is off.
In Spectrum Analyser mode, the first sub-menu displays the following functions:
Band switching
Span
Reference level
Dynamic range
Dual marker
Marker B
A
Marker A
B
Single marker
Carrier
Ref. Noise (Only in C/N measurements). Permits to define the
Page 20
Permits to switch from terrestrial (5-862 MHz) to satellite
band (900-2150 MHz) and vice versa.
Defines the frequency range displayed between Full (the
entire band), 500 MHz, 200 MHz, 100 MHz, 50 MHz, 32
MHz, 16 MHz, 8 MHz and 4 MHz (This last one only in
satellite band).
Defines the reference level between 10 and 130 dBµV in
10 dB steps.
Defines a selectable dynamic range between 2, 5 and 10
dB/div.
(Only analogue channels, level measurement mode and
single marker mode). Enables dual markers to be shown on
the displayed spectrum.
(Only in dual marker mode). Selects marker A as the active
marker (tuneable).
(Only in dual marker mode). Selects marker B as the active
marker (tuneable).
(Only in dual marker mode). Activates the single marker on
the displayed spectrum.
frequency where noise level will be measured (see Ref.
Noise
Carrier function).
USER'S MANUAL. PROLINK-4/4C
IMPORTANT REMARK
Premium
06/2005

Publicidad

Tabla de contenido
loading

Tabla de contenido