Handshake And Control Lines - Promax PROLINK-4/4C Premium Manual De Instrucciones

USER'S MANUAL. PROLINK-4/4C

4.14.1 Handshake and Control Lines

Next is described the handshake and control lines used by the PROLINK-4/4C
Premium:
The following parameters are used for printing through the serial port:
-
Rate:
Data bits:
Parity:
Stop bits:
To modify the printer parameters see 4.14.2 CI-23 Set-up.
The control lines used are:
-
DATA TRANSMIT (PROLINK-4/4C
-
printer.
CLEAR TO SEND (PROLINK-4/4C
-
Data are sent only when this line is active.
DATA TERMINAL READY (PROLINK-4/4C
-
permanently active in order to indicate the establishment of the
communication.
Connections
The cable between the PROLINK-4/4C
following connections:
Figure 67.- Connector RS-232C PROLINK-4/4C Premium. Pins numbering.
06/2005
Premium
19,200 bauds
8 bits
None
1
Premium
Premium
Premium
pin 3): To send data to the
pin 8): Data transfer control.
Premium pin 4): This line is
and the printer must have the
Page 107