Retrieving A Configuration (Recall); Direct Access To Functions - Promax PROLINK-4/4C Premium Manual De Instrucciones

6. Finally, press
stored. If any other key is pressed, an error will be indicated and the memory will
not be updated.

4.12.2 Retrieving a Configuration (RECALL)

Press the
shows the different parameters of each measuring configuration stored. Turning the
rotary selector [4] select the configuration to be retrieved (a number between 1 and 99).
Pressing the [25] key again or the rotary selector [4] will retrieve the configuration.
Figure 65.- RECALL screen, retrieving a measurement configuration.

4.13 Direct Access to Functions

Keys [28] and
TV and Spectrum Analyser mode functions menus. To establish a relationship between
the direct access key and a function, access the functions menu, select the function you
wish to access directly and press key
press key [28] or
To directly execute a previously edited DiSEqC program, pressing the key
assigned to the program will execute the memorised command.
Page 104
[25] key or the rotary selector [4] and the configuration will be
[25] key. The screen RECALL will appear on the monitor which
[29] give direct access to any of the functions on the
[29] the function will be accessed directly.
USER'S MANUAL. PROLINK-4/4C
[28] or [29]. From then on when you
Premium
06/2005